收藏本站
1. Connect a serial cable and Ethernet cable between the board and a host PC if required.
2. Connect auxiliary equipment to board if needed.
3. Configure the board option jumpers as shown.
Table 6: Run Mode Setup
PWR_SEL
BDM_EN
COM_EN
VX_EN
LED_EN
Set to VB
OFF
ALL ON (if required)
ON (if required)
ON (if required)
4. Connect the USB cable to an open USB port on the host PC and attach to the USB port
on the target board. LED’s D301 and D302 located adjacent to the USB connector, and
the VDD LED will light and the loaded application will begin to execute, if the RESET
vector has been programmed
Debug Mode
Debug Mode supports application development and debug using the ColdFire background
debug module (BDM). Background mode is accessible using either the integrated USB-BDM
or an external ColdFire BDM cable. Using the integrated BDM requires a host PC with an
available USB port and an A/B USB cable and appropriate hosting software. The USB cable
must be USB 2.0 compliant. An external BDM cable can be attached to the 26-pin BDM_PORT
header. However, this header is not installed in default configurations. The steps below
describe using the integrated USB-BDM. See the POWER section below for details on
configuring the board for alternate power input. Connect a serial cable (not included) between
the board and a host PC if needed.
1. Connect a serial cable and ethernet cable between the board and a host PC if required.
2. Connect auxiliary equipment to board if required.
3. Install and launch CodeWarrior 6.1 Special Edition, or other software capable of
communicating with the ColdFire MCU.
4. Configure the board option jumpers as shown.
Table 7: Debug Mode Setup
PWR_SEL
BDM_EN
COM_EN
VX_EN
LED_EN
Freescale Semiconductor
Set to VB
ON
ALL ON (if required)
ON (If required)
ON (if required )
17
发布紧急采购，3分钟左右您将得到回复。

采购需求

(若只采购一条型号，填写一行即可)

发布成功！您可以继续发布采购。也可以进入我的后台，查看报价

发布成功！您可以继续发布采购。也可以进入我的后台，查看报价

*型号 *数量 厂商 批号 封装
添加更多采购

我的联系方式

*
*
*
相关PDF资料
PD412411 DIODE MOD ISO DUAL 2400V 1100A
PF24-30 TRANSFORMER LO PRO 15VAC 1.6A
PFT12-28 TRANSFORMER 16VCT 28VCT 12VA
PFT12-35 TRANSFORMER 16VCT 35VCT 12VA
PFT24-28 TRANSFORMER 16VCT 28VCT 24VA
PFT24-35 TRANSFORMER 16VCT 35VCT 24VA
PFT6-32 TRANSFORMER 17.5VCT 31.5VCT 6VA
PFT6-38 TRANSFORMER 17.5VCT 37.5VCT 6VA
相关代理商/技术参数
PB524 制造商:Datak Corporation 功能描述:
PB534 制造商:Datak Corporation 功能描述:
PB5400/15 制造商:PB Swiss Tools 功能描述:
PB5400/5 制造商:PB Swiss Tools 功能描述:
PB5400/7 制造商:PB Swiss Tools 功能描述:Bulk
PB540WP210B-C4 制造商:GP BATTERIES 功能描述:CHARGER 3 HOUR NIMH+2100MAH CELLS 制造商:GP BATTERIES 功能描述:CHARGER, 3 HOUR NIMH+2100MAH CELLS
PB542718 功能描述:罩类、盒类及壳类产品 PB BOX - SOLID COVER RoHS:否 制造商:Bud Industries 产品:Boxes 外部深度:6.35 mm 外部宽度:6.35 mm 外部高度:2.56 mm NEMA 额定值: IP 等级: 材料:Acrylonitrile Butadiene Styrene (ABS) 颜色:Red
PB542718CC 功能描述:罩类、盒类及壳类产品 PB BOX - CLEAR COVER RoHS:否 制造商:Bud Industries 产品:Boxes 外部深度:6.35 mm 外部宽度:6.35 mm 外部高度:2.56 mm NEMA 额定值: IP 等级: 材料:Acrylonitrile Butadiene Styrene (ABS) 颜色:Red